2012 Hot Selling type LC1-D contactor

1.Rated voltage:110~660V 2.Rated current:9~150A 3.Poles:3/4P 4.Auxiliary of contact:1NO+1NC/2NO+2NC 5.Standard:IEC60947-2 1.Rated voltage:110~660V2.Rated current:9~150A3.Poles:3/4P4.Auxiliary of contact:1NO+1NC/2NO+2NC5.Standard:IEC60947-2CONNECTIONS FOR POWER AND CONTROL CIRCUITS:

Type of contactor

CYC1-D09...D18 DT20& DT25

CYC1-D25...D38 DT32 & DT40

CYC1-D40

CYC1-D050...D95

CYC1-D115& DT25CYC1-D150

ENVIRONMENT

Rated insulation voltage(Ui)	Conforming to IEC 947-4-1, over voltage category III, degree fo pollution:3	V	690	690	1000	1000	1000
Rated impulse with stand voltage(Uimp)	Conforming to IEC 947	KV	6	6	8	8	8
Conforming to standards			IEC 947-1,947-4-1,EN60947-1,EN60947-4-1
Degree of protection(1)	Power connection		Protection against direct finger contact IP2X
(front face only)	Coil connection		Protection against direct finger contact IP2X (except CYC1-D40...D80)
protective treatment	Conforming to IEC 68		"TH"
Ambient air temperature	Storage	°C	-60...+80
around the device	operation	°C	-5...+60
	Permissible	°C	-40...+70,for operation at Uc
Maximum operating altitude	Without derating	m	3000
Operating position	Without derating		±30°possible,in relation to normal vertical mounting plant
Flame resistance	Conforming to IEC 695-2-1	°C	960
Shock resistance(2)	Contactor open		10gn	8gn	8gn	8gn	6gn
1/2 sine wave=11ms	Contactor closed		15gn	15gn	10gn	10gn	15gn
Vibration resistance(2)	Contactor open		2gn	2gn	2gn	2gn	2gn
5...300Hz	Contactor closed		4gn	4gn	4gn	3gn	4gn

(1) Protection ensured for the connection cross-sections shown on the next page and for connection via cable.

(2) In the least favourable direction,without change of contact(coil supplied at Ue)

2012 Hot Selling type LC1-D contactor